Double Girder Overhead Crane Railway Yard Double Girder Gantry Crane

Double Girder Overhead Cranes Railway Yard Double Girder Gantry Crane DrawingRMG SpecificationItem RMG5508RMG5530SRMG5540SRecommended parametersOptional rangeSWL under soreader(t) 40414135,41,50,6510-65Span(m) 35304030,4015-50Outreach(m) 3/05/57.5/7.54.5,7.54-18Hoist height(m) 2115.318.212.49.5-21.1

Featured Products

Double Girder Overhead Cranes Railway Yard Double Girder Gantry Crane

Double Girder Overhead Cranes Railway Yard Double Girder Gantry Crane

 
Drawing
Double Girder Overhead Cranes Railway Yard Double Girder Gantry Crane


Double Girder Overhead Cranes Railway Yard Double Girder Gantry Crane
Double Girder Overhead Cranes Railway Yard Double Girder Gantry Crane



RMG Specification
Item RMG5508RMG5530SRMG5540SRecommended parametersOptional range
SWL under soreader(t) 40414135,41,50,6510-65
Span(m) 35304030,4015-50
Outreach(m) 3/05/57.5/7.54.5,7.54-18
Hoist height(m) 2115.318.212.49.5-21.1
 15.3
 18.2
Hoist speed(m/min)  Empty load25222015,20,25,3010-40
Hoist speed(m/min) Full load50404030,40,5020-80
Trollry travelling speed(m/min) Empty load70708060,70,80,9030-150
Trollry travelling speed(m/min) Full load7010010060,70,80,9030-150
Gantry travelling speed(m/min) Empty load40505040,50,6030-120
Gantry travelling speed(m/min) Full load40505040,50,60,70,80,9030-120
Trollry slewing speed(m/min)  ///1.0,1.1,1.2,1.3,1.4,1.5Only available for upper and lower trollry
spreader slewing angle 555-10~+270or-5~+5-10~+270or-5~+5
Power supply mode Cable reelCable reelCable reelCable reel,Touch lineAs per client's requirement
Supply voltage 6.6KW380V380V380V,10KW380V-10KW

Summary of Main System Features  
General Control Overview.  
• "Crane ON" status.
• Individual Drive ON screens (one for each drive).
• Detailed drive data (motor current, voltage, speed).
• Wind speed and history.
• Spreader status.
• Fault stack. 
• Load statistics.
• Maintenance 

Advantages of RMG for Yard Stacking  

• Suitable for both port and rail terminals.   
• Suitable for various yard space conditions.
• Increased yard capacity with wider and higher stack possibilities.
• Reduction in emissions and noise. 
• Minimal maintenance.
• Electric supply for energy efficiency and reduced running costs.


 Characteristic
1. Lifting appliance flexible box holding technology Adopt advanced software intelligent deceleration technology, cooperate with hardware detection and protection equipment, dynamically adjust the deceleration time and position in the case, reduce the impact on the equipment and the wheel pressure of the whole machine, and improve the service life and stability of the equipment.
 2.  Windbreak anchoring system It is equipped with two sets of independent anchoring devices to resist horizontal force, four sets of windproof cables to resist overturning moment, and four sets of windproof crawlers or wheel clamps to ensure the stability of the whole machine. It can be equipped with electric iron wedge, wheel clamping device, rail clamping device, top rail device and other wind proof devices, which is convenient and reliable for operation.
3. Intelligent rectification technology of gantry Through real-time detection of the frame deflection relative to the track, the deflection is used as the control signal to control the frequency converter to adjust the speed of the driving motor in real time, manually or automatically correct the frame deflection, so as to avoid the gantry gnawing the track, ensure the safe operation of the equipment, slow down the wear of the wheel and track, and improve the service life of the equipment.



Note:
In order to offer the most suitable design solution for you, it will be great helpful if you can offer us the following
information to us:
1. Lifting capacity.
2. Span length.(rail center to rail center)
3. Lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us to supply the rails? How long is it?
5. Power supply: Voltage
6. Working condition: what 's the material handling? working site temperature?
7. It would be much better if it is possible for you to offer the drawing photo of your workshop.


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours